[ ] Run the following commands in a terminal window

install ethtool

sudo apt install ethtool -y

list network devices

ip addr
[ ] Continue with the following commands to check if the device supports WOL

replace enp6s0 ** with the device name to test

sudo ethtool enp6s0

[ ] If it contains a g it supports WOL, continue with the following commands

enable wol on the device

sudo ethtool -s vmbr0 wol g

edit the network interfaces configuration

sudo nano /etc/network/interfaces
[ ] Paste the following below the iface line for the network device
ethernet-wol g

NOTE: If the WOL flag doesn’t stick with the configuration above, replace the “ethernet-wol g” value in /etc/network/interfaces with “post-up /usr/sbin/ethtool -s enp6s0 wol g”, replacing enp6s0 with the name of the interface.


in modem Mirotik:
tool → script → source
/tool wol mac=0a:e0:af:ae:00:7c interface=ether2
/tool wol mac=0A-E0-AF-A4-47-E2 interface=ether2
Sometimes interface is ether1 or ether3. plz check with “ip addr” , enp6s0 nằm ở dòng thứ mấy.